• Connecting Chest Strap & GPS Watch + Manual

    Coupling chest strap and GPS watch

    Each chest strap has its own ID, and was coupled with the GPS watch in the factory in order to avoid defects. If you replace the GPS watch or the chest strap then they must be re-coupled. The same applies after a battery change in the chest strap. To couple the chest strap and GPS watch:

    1. Select the menu point "HRM" then tap the toggle button "On/off" and set it to "HRM     off" in the adjustment mode.
    2. Select the menu point "HRM" and then "Pairing" in the adjustment mode.
    3. Touch the sensor contact surface of the chest strap for a few seconds.
    4. When the pairing is successfully completed, the notification "OK" will appear.
    5. If the notification "failed" appears, then the coupling did not work. Try again by             proceeding as described above.
    6. After the coupling, switch the HRM function back on. Select the menu point                   "HRM" and tap the toggle button "On/off" and set it to "HRM on" in the adjustment       mode.

     image005.jpg

    Tip: Please ensure that the small contact sheet made of metal is covering the battery!


    Please find the manual for the GPS Watch below:

    https://www.runtastic.com/shop/PDF/GPS_EN_EU.pdf

    1 Application range................................................................................ 4
    2 Safety and maintenance ..................................................................... 5
    3 Outlet volume and functional press keys........................................... 11
    3.1 Outlet volume................................................................................11
    3.2 Functional press keys.....................................................................12
    4 Start-up............................................................................................ 13
    5 General information regarding the GPS reception............................. 16
    6 Modes of the GPS watch................................................................... 17
    7 Economic functioning........................................................................ 49
    8 Display brightness............................................................................. 50
    9 Charging the accumulator, replacement of batteries respectively...... 50
    10 Data download................................................................................. 52
    11 Technical data................................................................................... 55
    12 Declaration of compliance ................................................................ 56
    13 FAQ/Correction of errors .................................................................. 57
    14 Warranty.......................................................................................... 60

  • Is Live Tracking Possible?

    The GPS watch doesn't support Live Tracking since there is no data connection within the watch.

  • Troubleshooting GPS Errors

    If you are experiencing problems with your GPS reception please download A-GPS data. The watch has a function called “A-GPS” (Assisted global Positioning System).

    A-GPS is a method which speeds up the search process for a good GPS-reception under bad weather conditions. The A-GPS data will be saved on a server and transferred to the watch via Runtastic Connect. The validity period of this data is 7 days. In order to use this function you require internet access.

    Download the A-GPS data:

    Connect the watch to the USB cable and then plug the cable into your computer.
    As soon as the watch is linked to the computer, the A-GPS data will be transferred to the watch.

    If the problem persists please do a Reset of the GPS watch:

    In the setting mode select ''System'' and then select ''Settings'' from the menu, then select ''Sys Reset“. Select "On" to perform a system reset. By doing this all the values, all the basic settings reset and all the data (paths, reference points, training histories, etc.) deleted.

  • Troubleshooting Data Connection Issues

    If you have problems sending data from Runtastic Connect to Runtastic.com, or you are experiencing problems with the connection between the GPS watch and your computer please clean the contacts of the watch with a light soap. After this the connection should work fine again.

    If you receive the error-message "Timeout while reading...", please try a reset of the GPS watch by pressing all 4 buttons for at least 3 seconds. 

  • Compatibility

    Runtastic Connect is supported for Windows & Mac computers.

  • PDF Documents

    Declarations of conformity

    Europe - Declaration of conformity

    PDF - Konformitätserklärung

    (Déclaration de conformité, Declaración de conformidad, Dichiarazione di conformità) 

    Instructions

    English 

    PDF - Manual

    German 

    PDF - Bedienungsanleitung

    Spanish

    PDF - Manual

    French

    PDF - Manuel d'utilisation

    Italian 

    PDF - Manuale

    Dutch 

    PDF - Gebruiksaanwijzing