• Runtastic Receiver and Heart Rate Monitor: Using A Bluetooth Headset & Runtastic Receiver And Heart Rate Monitor

    Using a Bluetooth headset and the Runtastic Receiver and Heart Rate Monitor at the same time isn't possible due to technical reasons.

    As soon as the Receiver is plugged in, the smartphone sends audio signals only via the headphone jack.

  • Runtastic Heart Rate Combo Monitor: Activation / Troubleshooting

    First, please ensure that the elastic strap is sitting firmly against the chest just below the pectoral muscles. Also check if you have good contact with the skin, if not then moisten the contacts of the transmitter or use an ECG gel (which is available in health stores).

    To activate your heart rate measurement with the Runtastic Bluetooth Smart Combo Monitor please do the following:

    Please make sure to reboot your phone before doing the following.

    1. Enable Bluetooth in the Settings of your iPhone 4S or higher. Android devices see Android compatibility here: https://help.runtastic.com/hc/en-us/articles/200370382-Bluetooth-Smart-Combo-Monitor-compatibility-for-Android).

    2. Open the Runtastic app on your smartphone.

    3. Access the menu item "Settings" and select "Heart rate settings".

    4. Select and activate the Bluetooth interface to begin searching and connect the chest strap to the smartphone.

    Please check the battery in the sending unit. This means that the little metal plate should be placed over the battery.

    Bildschirmfoto_2013-08-07_um_10.22.27.png

    Bildschirmfoto_2013-08-07_um_10.22.43.png

     

    Following these steps should help you to connect your heart rate monitor.

    If all of the above doesn’t work please try a reinstall of the app.

    Have you installed other apps using Bluetooth devices like tracking apps? Please try to uninstall these apps for testing purposes and retry the connection.

  • Runtastic Receiver and Heart Rate Monitor: Troubleshooting Runtastic Receiver and Heart Rate Monitor

    General:

    Plug the receiver into the headphone jack on your smartphone. Check the correct positioning of the receiver. You can also connect your smartphone's headphones to the receiver (the receiver features a headphone jack at the top).

    1. Should there be no heart rate reading, it might be that the contacts for the receiver in your smartphone are poled different. In this case open the case of the receiver (as described in point ''Changing the battery for the receiver'') and change the position of the switch in the case. Reattach the cover of the receiver and repeat the activation process of the heart rate measurement as described in point "Activating heart rate measurement'' below.

    2. The function of the microphone and the speaker will be disabled when the receiver is plugged in the phone, it is however possible to use a headset.

    3. The remote control on iPhone headphones does not work when the receiver is plugged into the phone

    4. The receiver will be turned on and consume battery when it is plugged in the phone even if the Runtastic app is not activated. To conserve battery life it is best to take out the receiver when it is not in use.

    5. The battery life of the receiver is around 2.5 years if it is used 1 hour per day. Please change the battery when it is out of battery and as the receiver cannot receive signal from the chest strap without power.

    Please check if you have plugged the receiver completely into the jack of the phone. Sometimes protection covers can cause problems.

    Activating heart rate measurement

    To activate the heart rate measurement function, open the Runtastic app on your smartphone.

    iPhone: Go to "Settings" and under connection select ''Heart Rate''. Select the option "Runtastic Receiver with Chest Strap'' and toggle ''Enable Runtastic Receiver'' to ''ON'' and then press the button ''Re-Pair''.


    Android: Go to "Settings" and select "Heart Rate Settings". Select the option "Runtastic Receiver and heart rate monitor", it will then begin connecting.

    BlackBerry: Go to "Settings" and select "Heart Rate Settings". Select the option "Heart Rate Monitoring" and then the setting "enabled", followed by the option "Heart Rate Sensor" and the setting "runtastic".

    Windows Phone: Go to "Settings" and select "Heart Rate Settings". Set the option "Runtastic Receiver (5.3 kHz)" to ON.

     

    Attaching the chest strap

    Connect the elasticated strap to the sensor. Adjust the strap so that the sensor rests firmly against your chest below your pectoral muscles.

    To ensure good contact with your skin you should moisten the contacts of the sensor or apply an ECG gel (available from health stores).

    Note for iPhone users:

    If you are experiencing problems when updating to iOS 7 then please do the following:

    Go to Settings > Privacy > Microphone > Activate Runtastic

     

    Switching between coded and uncoded transmission


    16 coded and one uncoded channel can be selected. Pressing the button on the back of the chest strap switches between the coded channels. If you press and hold the button for 5 seconds, it will automatically switch to the uncoded channel. Pressing the button again will switch between to the encoded channels.

    iPhone: Go to "Settings" and select ''Heart Rate Settings'', and on the bottom of the screen you can see on which channel the chest strap is sending. Should you wish to change the channel, press the button on the chest strap as described above to switch to the next coded channel. Press the button ''Re-Pair'' and your smartphone will establish a connection to the chest strap again.

    Android: Go to "Settings" and select "Heart Rate Settings", under "Sensor channel" you can see on which channel the chest strap is sending. If it is using a coded channel, it shows a digit. If it uses the uncoded channel, it reads ''uncoded''. Should you wish to change the channel, you should disconnect the chest strap from the receiver by switching to ''No pulse connection''. Now change the channel, as described above, by pressing the button on the back of the chest strap. Go back to "Receiver + Chest strap (5.3 kHz)" again, your smartphone will establish a connection to the chest strap again on the new channel.

    BlackBerry: Go to "Settings" and select "Heart Rate Settings", under "Sensor channel" you can see on which channel the chest strap is sending. If it is using a coded channel, it shows a digit. If it is using the uncoded channel, it reads ''uncoded''. Should you wish to change the channel then press the button on the chest strap, as described above, to switch to the next encoded channel. Select "Connect Sensor" again and your smartphone will establish a connection to the chest strap.

    Windows Phone: Go to "Settings" and select "Heart Rate Settings", under "Sensor channel" you can see on which channel the chest strap is sending. If it is using a coded channel, it shows a digit. If it is using the uncoded channel, it will say ''uncoded''. Should you wish to change the channel, press the button on the back of the chest strap, as described above to, switch to the next coded channel. Select "Connect Sensor" again and your smartphone will establish a connection to the chest strap.

  • Runtastic Heart Rate Combo Monitor: Bluetooth Smart Combo Monitor Compatibility for Android

    The Runtastic app & the Runtastic Bluetooth Smart Combo Monitor currently works with Bluetooth Smart Ready Android™ devices running Android 4.3 or higher, including the Samsung Galaxy S4.

  • Runtastic Receiver and Heart Rate Monitor: Compatibility

    iPhone: 3GS, 4, 4s, 5, 5s, 5c, 6, 6 Plus

    Android: 2.1 and higher

    Blackberry: 8330m, 8350i, 8900, 9000, 9100, 9105, 9300, 9700, 9780, 9788

    Windows Phone: OS 7.5 and higher

  • Runtastic Heart Rate Combo Monitor: Compatibility

    The Runtastic Heart Rate Combo Monitor is compatible with:

    iPhone: 4s, 5, 5s, 5c, 6, 6 Plus, 7 

    Android: Bluetooth® Smart Ready devices running Android 4.3 or newer

    Windows Phone: Bluetooth® Smart Ready Windows Phone running 8.1

  • Runtastic Receiver and Heart Rate Monitor: PDF Documents RUNDC1

    Declarations of conformity

    Europe - Declaration of conformity

    PDF - Konformitätserklärung

    (Déclaration de conformité, Declaración de conformidad, Dichiarazione di conformità)

    Instructions

    English 

    PDF - Manual

    German 

    PDF - Bedienungsanleitung

    Spanish 

    PDF - Manual 

    French 

    PDF - Mode d'emploi 

    Italian

    PDF - Manuale

    Nehterlands

    PDF - Gebruiksaanwijzing

    Swedish

    PDF - Bruksanvisning

  • Runtastic Heart Rate Combo Monitor: PDF Documents

    Declarations of conformity

    America

    PDF - Declaration of conformity

    Canada

    PDF - Declaration of conformity

    Germany

    PDF - Konformitätserklärung

    Instructions

    English

    PDF - Manual

    German

    PDF - Bedienungsanleitung

    French

    PDF - Manuel d'utilisation

     

  • Runtastic Receiver and Heart Rate Monitor: PDF Documents RUNDC2

    Declarations of conformity

    Europe - Declaration of conformity

    PDF - Declaration of conformity 

    (Déclaration de conformité, Declaración de conformidad, Dichiarazione di conformità)

    Instructions

    English

    PDF - Manual

    German

    PDF - Bedienungsanleitung